Auto Update: Activate this checkbox and select a value from the drop‐down list to
set how often this program should automatically check for updates. Click the Check
for Updates button to check if there is any update.
Power Saving: Activate this checkbox and select a value from the drop‐down list to
set when the scanner will enter power saving mode. Simply press on any of the
scanner 's physical buttons to wake it.
ICC Profile: Activate this checkbox and select a profile from the drop‐down list to
set device output color standard.
Remove Scratch/ Dust: Activate this checkbox and select a desired mode from the
drop‐down list to remove scratch/dust. This function is only for the infrared built‐in
model.
The Scan Screen
The Scan screen is where you set your scanning parameters. These scanning
parameters will also be used when you initiate a scan using the physical buttons on
your scanner.
Scan mode: Selected by clicking on the respective button on the left side,
you can choose between Positive, Negative and Custom. Basically this allows
you to create 3 scan profiles; one for positives, one for negatives and one for
either positives or negatives.
Resolution: Select a desired resolution from the drop‐down list. The higher
the resolution, the more detailed the scan and the resulting file will be.
Resolution
7200 dpi*
Windows & Mac
Approx. 9000 x 6200 dots
15