Scanner Overview
1. Eject Button (with indicator light)
Press this button to eject the currently inserted film holder.
2. Positive Button
Press this button to scan positive source material with the currently defined settings.
3. Negative Button
Press this button to scan negative source material with the currently defined settings.
4. Custom Button
Press this button to perform a custom scan with the currently defined settings.
5. Power Saving Button (with indicator light)
Press the button to wake the scanner up from sleep mode. Press and hold the button for 2
seconds to put the scanner into sleep mode.
6. Front Film Holder Slot
Insert the film holder into the scanner through the dust cover.
7. Kensington Security Slot
Used for attaching lock‐and‐cable apparatuses to prevent device theft.
8. USB Port
It connects the scanner to a USB port on your computer by the included USB cable.
9. Power switch
Use this to turn the scanner ON or OFF.
10. Rear Film Holder Slot
Please leave about 15 cm in the back of the scanner to allow the film holder to go through.
11. Power Receptor
It connects the scanner to a standard AC power outlet by the included power adapter.
5