Led Indicator; Film Holders - Plustek OpticFilm 135 User Manual

LED Indicator

The Power Saving button LED and Eject button LED indicate different scanner status.
Eject button Power Saving
LED button LED
Off
Blue
Blue Blinking Blue
Orange
Off
Off

Film Holders

2 film holders are included in the package. They guarantee correct scanning results.
Information
Using 35mm Mounted Film Holder
Insert mounted film into slots with emulsion (non-glossy) side down.
There are arrows and illustrations on the frame of each slot. Please follow the
illustrations to insert the mounted film.
The scanner is turned on and operating normally, no
Blue
film holder has been inserted.
The film holder has been inserted and the scanner is
Blue
ready to scan.
The film holder is being scanned.
The film holder has been ejected and can be
Blue removed, or the film holder cannot be inserted
because there is no USB connection.
Orange The scanner is in sleep mode.
The scanner is off, either because the power is not
Off turned on, or because the AC adapter is not properly
plugged into an AC power outlet.
The scanner automatically detects the type of film holder you
have inserted and will automatically define the crop areas
according to the film holder.
These 2 film holders can be used for both positive and negative
source material, you just have to select the responding button
to scan.
Status
6