Using Borders - Videonics MXPro DV User Manual

B O
ASIC PERATIONS
To create a custom color:
1
2
3
4
U B
SING ORDERS
Borders have many uses, such as providing a distinct separation between two sources
while running a transition.
You can also use borders to frame images in a picture-in-picture (PIP) image, and so
forth. Whatever purpose you use a border for, you can specify the color and style for
the border.
Press or
BG COLOR BORDER COLOR
Color Selector.
Press + or
LEARN BG COLOR
change).
These key combinations activate Learn Color mode. MXProDV blinks the
selector lights to indicate you are in the proper mode.
Use the and -
JOYSTICK T
a Move the - up and down its slot to adjust luminance.
T BAR
b Move the to adjust color.
JOYSTICK
Red
Yellow
Green
Cyan
When the color you want appears in the Color Selector, press
Color mode and the
VIDEO
If you decide you don't want to change the color after manipulating the
, press +0 (zero) to revert back to the original color. MXProDV restores the
T-BAR SHIFT
original color and exits from Learn Color mode (the
ing).
Wipe Transition Wipe Transition
No Border
NOTE
For the two following procedures, note that not all border styles can be applied in all
cases. Single PIPs as well as edge and shape transitions accept any border style. Basic
transitions accept only color borders. You cannot apply border styles to trailing
transitions, nor can you use them in compose or multi-PIP modes.
until the color you want to change appears in the
+ (depending on which one you want to
LEARN BORDER COLOR
in combination to define the new color.
BAR
Magenta
Blue
/ lights cease blinking.
AUDIO
White Border
U B
SING ORDERS
VIDEO
. You exit from Learn
OK
JOYSTICK
/ lights cease blink-
VIDEO AUDIO
55
/
AUDIO
and