Display - Videonics MXPro DV User Manual

F
UNCTIONS
D
ISPLAY
To control what appears on the Preview monitor, use the

DISPLAY

configurations. See samples of these configurations on the next page. The
illustrations show the key combination you can use to directly access any display
configuration.
When you run a transition, the Preview screen shows a full-screen image, running at
full frame-rate — the same as the signal going through the output channel.
or use the shortcut keys described here to cycle through the different display
Standard (press +1)– Provides most extensive display. Shows preview images
SHIFT
of all active input sources and a menu of up to 30 different transitions from
which you can choose.
Two Channel (press
SHIFT
NEXT sources. Preview images increase in size, but the Transitions Menu shows
only 20 transitions.
Full (press +3) – Divides preview screen into four sections. Each section
SHIFT
shows a preview image of the currently active input sources. The Transitions
Menu is not available.
Next (press +4) – Displays only a full-screen preview image of the NEXT
SHIFT
source.
Current (press +5) – Displays only a full-screen preview image of the CUR-
SHIFT
RENT source.
+2) – Displays preview images for the CURRENT and
D
ISPLAY
function. Press
DISPLAY
87