Audio Mixer Controls; Using Background Audio - Videonics MXPro DV User Manual

142 MXP DV U G
RO SER UIDE

Audio Mixer Controls

The default setting in the Audio Mixer for all channels is 0 (zero) dB. The default set-
ting for the Background Mix level is no mix.
The following tables explain how to operate the Audio Mixer controls from the
MXProDV keyboard.
Table 14: Selecting Mixer Channels
Table 15: Adjusting Audio Levels

Using Background Audio

Any audio input can be used as the source for background audio. Use the Route
menu to select a source and press
channel. To control the level of the music, use the Background Music slider in the
Audio Mixer. Use the keyboard controls shown in the preceding table to adjust the
audio level.
Depending on how you set things up, the CURRENT source transitions to the NEXT
source and the background music plays uninterrupted between them. The audio
from the CURRENT and NEXT sources normally follows the video transitions—for
example, if you set up a dissolve transition, audio from the CURRENT source fades
away, then the audio from the NEXT source fades in.
T ...
O
Select a specific channel
T ...
O
Raise level one tick
Lower level one tick
Raise level ten ticks
Lower level ten ticks
Raise/Lower level arbitrarily
Control mix between Background Music
and channel audio
Restore previous slider positions
U
SE THESE KEYS
/
NEXT A
/
NEXT B
/
NEXT C
/
NEXT D
/
NEXT COLOR
+
SHIFT NEXT
U
SE THESE KEYS
UP ARROW
DOWN ARROW
+
SHIFT UP ARROW
+
SHIFT DOWN ARROW
-
T BAR
+ -
SHIFT T BAR
+0 (
SHIFT ZERO
+ / to access the background audio
SHIFT NEXT COLOR
C
HAPTER
...
/
(background)
COLOR
...
)
12