Which Source Is Which; Changing The Current Source; Choosing The Next Source - Videonics MX-1 Instruction Manual

VIDEONICS DIGITAL VIDEO MIXER
At the completion of the effect, the NEXT source becomes the CURRENT
source and you are ready to select the new NEXT source and effect for
another transition.

Which Source is Which?

The lights above the CUT buttons and the highlights on the PREVIEW
screen indicate the CURRENT and NEXT sources.
A
B
A The CURRENT source is always indicated by the yellow highlight on the
PREVIEW screen and the steady light above the appropriate CUT button.
B The NEXT source is indicated by the green highlight and by the flashing
light.
If NEXT and CURRENT are set to the same source, the source's light
flashes as if it were just the NEXT source.

Changing the CURRENT Source

Most of the time, you won't need to change the CURRENT source (because
the ending source of the previous transition automatically becomes the new
CURRENT source).
If you do wish to change the CURRENT source, press the appropriate CUT
button. For instance, CUT C will make C the CURRENT source and the
OUTPUT monitor will immediately show source C's video.

Choosing the NEXT Source

CUT CUT
A B
CUT CUT
A B
A B
CUT CUT
C D
CUT CUT CUT
C D
COLOR
C D
COLOR
PAGE 31
CUT
COLOR