Selecting Audio Sources; Ways To Use Audio; Audio Accompanies Video - Videonics MXPro DV User Manual

W A
ORKING WITH UDIO

Selecting Audio Sources

Select audio sources the same way you select video sources, using the
buttons and the highlights at the top of the Preview screen.
Indicates that source can be
monitored through MXPro's
Remember, MXProDV highlights the CURRENT video source in yellow (above the
Preview window). The speaker icon inside the highlight indicates that the current
audio is on channel A. MXProDV highlights the NEXT video source in green (below
the window). The speaker icon in this location means after you run the next transi-
tion, channel C's audio plays through.
In addition, the headphones icon indicates you can monitor this particular audio
through the MXProDV headphone jack, located on the rear of the unit.
W U A
AYS TO SE
You can manage audio in several different ways during video transitions. This section
explains some of the more useful methods.

Audio Accompanies Video

When you transition from one source to another, you might want the native audio
(that is, the sound recorded on the original media) to transition right along with the
video.
Example...
CURRENT Audio Source
headphone jack
UDIO
Suppose you want to dissolve from a shot of a car arriving in front of a house to a shot of
the person entering the house through the front door. In this case, you might want to
hear the car drive up, then hear the door to the house open.
S
ELECTING
NEXT Audio Source
A S 139
UDIO OURCES
and
CUT NEXT