User's Guide
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from the following and then
follow the instructions on the LCD panel.
❏ Wi-Fi (Recommended)
❏ Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ IPv6 Address
❏ Link Speed & Duplex
Related Information
"Making Wi-Fi Settings Manually" on page 26
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 27
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 28
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 29
&
"Printing a Network Status Sheet" on page 39
&
"Checking the Network Connection Status" on page 31
&
"Changing the Network Connection to Ethernet from the Control Panel" on page 41
&
"Making Advanced Network Settings" on page 30
&
Web Service Settings
Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
You can register to the service by tapping Register and follow the instructions.
Preparing the Printer
59