Paper Jams; Paper Feeds At A Slant; Several Sheets Of Paper Are Fed At A Time; Original Does Not Feed In The Adf - Epson ET-4750 User Manual

User's Guide

Paper Jams

Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Removing Jammed Paper" on page 176
&
"Loading Paper in the Paper Cassette" on page 45
&

Paper Feeds at a Slant

Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Paper Cassette" on page 45
&

Several Sheets of Paper are Fed at a Time

When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.

Original Does Not Feed in the ADF

❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Check that the ADF icon is on at the bottom of the screen. If it is off, place the originals again.
Related Information
"Available Originals for the ADF" on page 49
&
"Placing Originals on the ADF" on page 49
&
"Cleaning the ADF" on page 157
&
Solving Problems
177