Replacing Or Adding New Access Points; Changing The Connection Method To A Computer - Epson ET-4750 User Manual

User's Guide

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
"Changing the Connection Method to a Computer" on page 40
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select Software Installation screen, and then click Next.
Network Settings
40