Table of Contents
Advertisement
34 Functions in the main Menu
Backups
In the Backups menu, you can save parameter settings in
the control panel memory and restore parameter settings
from a backup to the drive. You can store up to two backup
files on the control panel.
You can copy backup files to and from a PC with any file manager application (eg,
Windows Explorer).
Creating a parameter backup
1. In the Backups menu, select Create backup.
If there is a free backup slot in the control panel, the following step is skipped.
2. Use
and
3. Wait until the backup is completed. An animation is
shown on the control panel during the backup process.
The control panel automatically returns to the Backups
menu.
Note: If the backup process is canceled or interrupted, the
previously saved backup file is not deleted or damaged.
Thus, if you accidentally start a backup process, you can safely cancel it before its
completion.
Restoring a parameter backup
1. In the Backups menu, select the backup file you want
to restore.
2. Select View backup contents and check that it is the
correct backup file and that it is suitable for restoring.
Note: This functionality is available in a future release.
3. Select one of the restore options:
•
To restore all settings, select Restore all parameters.
•
To restore a set of parameters, select Select restore parameters, select the
desired parameters from the list, and select Restore.
4. Wait until the restore is completed. An animation is
shown on the control panel during the restoring
process.The control panel automatically returns to the
Backups menu.
to select one of the existing backup files, and press Replace.
Advertisement
Table of Contents
