Summary of Contents for 360 Yield 360 Y-DROP CASE 120 BOOM
Page 1
INSTRUCTIONS 360 Y-DROP ® CASE 120' BOOM 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 11.30.2016...
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom.
Page 3
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM ESTABLISH DROP LOCATIONS Figures 1 and 2 Step 1 Locate the center of the machine and identify the location of all the drops. On the sprayer boom, mark where each riser mount will be located. This will ensure that the extension tubes will not interfere Figure 1 with the riser mounts.
Page 4
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL MOUNT ASSEMBLIES Front of Machine ON THE OEM PRIMARY BOOM Figure 4 Figure 4 shows size and location of U-bolts for OEM primary boom. The opposite arm of the central section will follow the same pattern as the arm shown.
Page 5
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL CENTER SECTION III. SQUARE TUBE Figure 8 Refer to Figure 4 for U-bolt locations. Step 1 With the threads pointing up, install U-bolt (1) on the front OEM center 3.5" 1.5" section boom. Bag AD (1.5") Figure 8 Bag AR (3.5")
Page 6
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL 360 Y-DROP BOOM Figure 10 Step 1 Assemble 5' boom sections (1) using the 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 10 assemble the entire 360 Y-DROP boom.
Page 7
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 14 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece.
Page 8
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 17 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 17 Figure 18...
Page 9
INSTRUCTIONS 360 Y-DROP CASE 120' BOOM INSTALL SHIELDS AND RISER HOSES Figure 20 Step 1 Install shield (1) onto riser tube (2). Figure 21 Step 2 Install base unit (1) onto riser tube (2). Figure 22 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 20 base and secure with hose clamps (2).