Table of Contents
Advertisement
Quick Links
INSTRUCTIONS
360 Y-DROP
®
JOHN DEERE 4710
360 Y-DROP
REGISTRATION
®
Please visit
productregistration.360yieldcenter.com
to complete the product registration for your
360 Y-DROP so we can better support our products
from day one and ensure you have the latest
upgrades, warranty parts and technical support.
Thank you!
360YIELDCENTER.COM
V1 - 12.22.2016
Advertisement
Table of Contents
Related Manuals for 360 Yield 360 Y-DROP JOHN DEERE 4710
Summary of Contents for 360 Yield 360 Y-DROP JOHN DEERE 4710
- Page 1 INSTRUCTIONS 360 Y-DROP ® JOHN DEERE 4710 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 12.22.2016...
-
Page 2: Recommended Tools
INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom. - Page 3 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 ESTABLISH DROP LOCATIONS Figures 1 and 2 Step 1 Locate the center of the machine and identify the location of all the drops. On the sprayer boom, mark where each riser mount will be located. This will ensure that the extension tubes will not interfere Figure 1 with the riser mounts.
-
Page 4: Extension Tube
INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL MOUNT ASSEMBLIES ON THE OEM PRIMARY BOOM Figure 4 Step 1 With the threads pointing down, install U-bolt (1) on the top of the OEM primary boom. Bag AD Step 2 Install bracket assembly (2) and flange Figure 4 lock nut (3). - Page 5 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL MOUNT ASSEMBLIES ON THE OEM PRIMARY BOOM (CONTINUED) Figure 7 Step 7 With the U-bolt pointing to the rear, install the yoke mount (1) and flange nuts to upper boom section. Step 8 With the square U-bolt threads pointing up and using the extra thick washer and Nylock nut, install yoke mount (2) to the...
- Page 6 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL CENTER SECTION III. SQUARE TUBE Figure 8 Step 1 Install u-bolt (1) and 14" top plate (2) using the supplied hardware. Step 2 Install bracket assemblies (3). Figure 9 Step 3 Install extension tube (1). Figure 8 Step 4 Install 360 Y-DROP boom bracket (2)
- Page 7 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL 360 Y-DROP BOOM Figure 11 Step 1 Assemble 5' boom sections (1) using the 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 11 assemble the entire 360 Y-DROP boom.
-
Page 8: John Deere
INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 15 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece. -
Page 9: Figure 9
INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 17 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 17 Figure 18... - Page 10 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4710 INSTALL SHIELDS AND RISER HOSES Figure 20 Step 1 Install shield (1) onto riser tube (2). Figure 21 Step 2 Install base unit (1) onto riser tube (2). Figure 22 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 20 base and secure with hose clamps (2).
-
Page 11: Installation Complete
Repeat Steps 1-11 for the remaining 360 Y-DROP Shields. Figure 26 INSTALLATION COMPLETE. 360YIELDCENTER.COM All other trademarks are the property of 360 Yield Center, its affiliates and/or its licensors. ©2016 360 Yield Center. All rights reserved.