Advertisement
Quick Links
INSTRUCTIONS
360 Y-DROP
®
JOHN DEERE 4730/4830
360 Y-DROP
REGISTRATION
®
Please visit
productregistration.360yieldcenter.com
to complete the product registration for your
360 Y-DROP so we can better support our products
from day one and ensure you have the latest
upgrades, warranty parts and technical support.
Thank you!
360YIELDCENTER.COM
V1 - 12.23.2016
Advertisement
Related Manuals for 360 Yield 360 Y-DROP JOHN DEERE 4730
Summary of Contents for 360 Yield 360 Y-DROP JOHN DEERE 4730
- Page 1 INSTRUCTIONS 360 Y-DROP ® JOHN DEERE 4730/4830 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 12.23.2016...
-
Page 2: Recommended Tools
INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom. - Page 3 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 ESTABLISH DROP LOCATIONS Figures 1 and 2 Step 1 Locate the center of the machine and identify the location of all the drops. On the sprayer boom, mark where each riser mount will be located. This will ensure that the extension tubes will not interfere Figure 1 with the riser mounts.
- Page 4 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL WET BOOM SPACER PLATE This process will create the clearance necessary for the new square tube and wet boom assembly. Figure 4 Step 1 Remove bolt assemblies (1). Figure 5 Step 2 Install two 4" spacer plates (1). Figure 4 From Center Section Kit Step 3...
- Page 5 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL NEW SQUARE TUBE III. BRACKET ON OEM PRIMARY BOOM Figures 6 and 7 To prepare for the steps that follow, you will need to drill a 7/16" hole 84" +/-6" from the pivot pin on the OEM Primary boom (1).
- Page 6 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL CENTER SECTION SQUARE TUBE Figure 11 Step 1 Install u-bolt (1) and 14" top plate (2) using the supplied hardware. Step 2 Install bracket assemblies (3). Figure 12 Step 3 Install extension tube (1). Figure 10 Step 4 Install 360 Y-DROP boom bracket (2)
- Page 7 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL 360 Y-DROP BOOM Figure 14 Step 1 Assemble 5' boom sections (1) utilizing 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 14 assemble the entire 360 Y-DROP boom.
- Page 8 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 18 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece.
- Page 9 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 21 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 21 Figure 22...
- Page 10 INSTRUCTIONS 360 Y-DROP JOHN DEERE 4730/4830 INSTALL SHIELDS AND VII. RISER HOSES Figure 24 Step 1 Install shield (1) onto riser tube (2). Figure 25 Step 2 Install base unit (1) onto riser tube (2). Figure 26 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 24 base and secure with hose clamps (2).
-
Page 11: Installation Complete
Repeat Steps 1-11 for the remaining 360 Y-DROP Shields. Figure 30 INSTALLATION COMPLETE. 360YIELDCENTER.COM All other trademarks are the property of 360 Yield Center, its affiliates and/or its licensors. ©2016 360 Yield Center. All rights reserved.