Download
Share
Print this page
  1. Manuals
  2. Brands
  3. 360 Yield Manuals
  4. Farm Equipment
  5. 360 Y-DROP HAGIE DELTA BOOM
  6. Instruction manual

360 Yield 360 Y-DROP HAGIE DELTA BOOM Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTIONS
360 Y-DROP
®
HAGIE DELTA BOOM
360 Y-DROP
REGISTRATION
®
Please visit
productregistration.360yieldcenter.com
to complete the product registration for your
360 Y-DROP so we can better support our products
from day one and ensure you have the latest
upgrades, warranty parts and technical support.
Thank you!
360YIELDCENTER.COM
V1 - 01.25.2017

Advertisement

loading

Related Manuals for 360 Yield 360 Y-DROP HAGIE DELTA BOOM

Summary of Contents for 360 Yield 360 Y-DROP HAGIE DELTA BOOM

  • Page 1 INSTRUCTIONS 360 Y-DROP ® HAGIE DELTA BOOM 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 01.25.2017...

  • Page 2: Recommended Tools

    INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom.
  • Page 3 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM ESTABLISH DROP LOCATIONS Figures 1 and 2 Step 1 Locate the center of the machine and identify the location of all the drops. On the sprayer boom, mark where each riser mount will be located. This will ensure that the extension tubes will not interfere Figure 1 with the riser mounts.
  • Page 4 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL MOUNT ASSEMBLIES ON THE OEM PRIMARY BOOM Figures 4 and 5 Step 1 With the threads pointing down, install U-bolt (1) on the bottom side of the OEM primary boom. Bag AB Step 2 Install bracket assembly (2) and flange Figure 4 nuts.
  • Page 5 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL CENTER SECTION III. SQUARE TUBE UPGRADE Figure 6 Step 1 Place top plate (1) on top of the center section and install two bolts (2) with washers and carriage bolts (3). Note the carriage bolt at the rear of the boom will need to be set in place on the 14"...
  • Page 6 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL 360 Y-DROP BOOM Figure 10 Step 1 Assemble 5' boom sections (1) utilizing 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 10 assemble the entire 360 Y-DROP boom.
  • Page 7 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL YOKE ASSEMBLIES ON THE OEM PRIMARY BOOM Figure 14 Step 1 With the U-bolt pointing to the front, install the yoke mount (1) and flange nuts to upper boom section. Step 2 With the square U-bolt threads pointing up and using the extra thick washer and Nylock nut, install yoke mount (2) to the 360 Y-DROP boom section.
  • Page 8 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 15 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece.
  • Page 9 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 18 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 18 Figure 19...
  • Page 10 INSTRUCTIONS 360 Y-DROP HAGIE DELTA BOOM INSTALL SHIELDS AND VII. RISER HOSES Figure 21 Step 1 Install shield (1) onto riser tube (2). Figure 22 Step 2 Install base unit (1) onto riser tube (2). Figure 23 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 21 base and secure with hose clamps (2).

  • Page 11: Installation Complete

    Repeat Steps 1-11 for the remaining 360 Y-DROP Shields. Figure 27 INSTALLATION COMPLETE. 360YIELDCENTER.COM All other trademarks are the property of 360 Yield Center, its affiliates and/or its licensors. ©2017 360 Yield Center. All rights reserved.