Advertisement
Quick Links
INSTRUCTIONS
360 Y-DROP
®
MILLER
NEW HOLLAND
360 Y-DROP
REGISTRATION
®
Please visit
productregistration.360yieldcenter.com
to complete the product registration for your
360 Y-DROP so we can better support our products
from day one and ensure you have the latest
upgrades, warranty parts and technical support.
Thank you!
360YIELDCENTER.COM
V1 - 12.01.2016
Advertisement
Related Manuals for 360 Yield 360 Y-DROP MILLER
Summary of Contents for 360 Yield 360 Y-DROP MILLER
- Page 1 INSTRUCTIONS 360 Y-DROP ® MILLER NEW HOLLAND 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 12.01.2016...
-
Page 2: Recommended Tools
INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom. -
Page 3: Step 2 For The Primary Boom; Starting At The
INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND ESTABLISH DROP LOCATIONS Step 1 Locate the center of the machine and identify the location of all the drops. On 48" the sprayer boom, mark where each riser 108" mount will be located. This will ensure 168"... - Page 4 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INSTALL MOUNT ASSEMBLIES ON THE OEM PRIMARY BOOM Figures 2 and 3 Step 1 With the threads pointing down, install diamond U-bolt (1) on the top side of the OEM primary boom. Bag AM (5.75") - mounting locations containing the added OEM gussets on primary booms Bag AL (5.0") - mounting locations with no Figure 2...
-
Page 5: Step 1 Install Bolts (1) Over The Oem Center
INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND 2008 + CENTER SECTION III. SQUARE TUBE INSTALLATION Figures 6 and 7 Step 1 Install bolts (1) over the OEM center section boom. Step 2 Place 14" top plates (2), spacer plate (3) and bracket assembly (4) into position and install 3/8"... - Page 6 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND PRE-2008 CENTER SECTION III. SQUARE TUBE INSTALLATION Figures 8 and 9 Step 1 Install bolts (1) over the OEM center section boom. Step 2 Place 14" top plates (2) and bracket assembly (3) into position and install 3/8" flange nuts (4).
- Page 7 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INSTALL 360 Y-DROP BOOM Figure 11 Step 1 Assemble 5' boom sections (1) using the 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 11 assemble the entire 360 Y-DROP boom.
- Page 8 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 15 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece.
- Page 9 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 17 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 17 Figure 18...
- Page 10 INSTRUCTIONS 360 Y-DROP MILLER NEW HOLLAND INSTALL SHIELDS AND RISER HOSES Figure 19 Step 1 Install shield (1) onto riser tube (2). Figure 20 Step 2 Install base unit (1) onto riser tube (2). Figure 21 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 19 base and secure with hose clamps (2).
-
Page 11: Installation Complete
Repeat Steps 1-11 for the remaining 360 Y-DROP Shields. Figure 25 INSTALLATION COMPLETE. 360YIELDCENTER.COM All other trademarks are the property of 360 Yield Center, its affiliates and/or its licensors. ©2016 360 Yield Center. All rights reserved.