Advertisement
Quick Links
INSTRUCTIONS
360 Y-DROP
®
ROGATOR
360 Y-DROP
REGISTRATION
®
Please visit
productregistration.360yieldcenter.com
to complete the product registration for your
360 Y-DROP so we can better support our products
from day one and ensure you have the latest
upgrades, warranty parts and technical support.
Thank you!
360YIELDCENTER.COM
V1 - 11.30.2016
Advertisement
Related Manuals for 360 Yield 360 Y-DROP ROGATOR
Summary of Contents for 360 Yield 360 Y-DROP ROGATOR
- Page 1 INSTRUCTIONS 360 Y-DROP ® ROGATOR 360 Y-DROP REGISTRATION ® Please visit productregistration.360yieldcenter.com to complete the product registration for your 360 Y-DROP so we can better support our products from day one and ensure you have the latest upgrades, warranty parts and technical support. Thank you! 360YIELDCENTER.COM V1 - 11.30.2016...
-
Page 2: Recommended Tools
INSTRUCTIONS 360 Y-DROP ROGATOR INTRODUCTION Before beginning, it’s important to know where each mounting bracket fits relative to the row spacing involved. The 360 Y-DROP unit should be precisely centered on the machine, as this is critical to the assembly of the system to the sprayer and for mounting the system to your sprayer boom. - Page 3 INSTRUCTIONS 360 Y-DROP ROGATOR ESTABLISH DROP LOCATIONS Figures 1 and 2 Step 1 Locate the center of the machine and identify the location of all the drops. On the sprayer boom, mark where each riser mount will be located. This will ensure that the extension tubes will not interfere Figure 1 with the riser mounts.
-
Page 4: Step 1 With The Threads Pointing Down, Install 1
INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL MOUNT ASSEMBLIES ON THE OEM PRIMARY BOOM NOTE: It is only on the 120' booms that the center section wet boom is below the OEM boom. On the 80' , 90' and 100' booms, the wet boom is positioned higher. - Page 5 INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL CENTER SECTION III. SQUARE TUBE Figure 6 Step 1 With the threads pointing down, install square U-bolt (1) on the front OEM center section boom. Center Section: Rogator 80, 90, 100 - Use Bag AD and Bag AJ Figure 6 Rogator 120 - Use Center Section Kit Step 2...
- Page 6 INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL 360 Y-DROP BOOM Figure 9 Step 1 Assemble 5' boom sections (1) using the 8" boom connectors (2) and the supplied hardware. Hardware Bag CC Step 2 Repeat Step 1 as needed in order to Figure 9 assemble the entire 360 Y-DROP boom.
- Page 7 INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL BREAKAWAY ASSEMBLY - ONE PIECE Figure 13 Step 1 Install breakaway assembly - one piece (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining breakaway assemblies - one piece.
- Page 8 INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL RISER MOUNTS WITHOUT BREAKAWAY ASSEMBLIES (OPTIONAL) Figure 16 Step 1 Install riser mount (1) using the square U-bolts (2) and the extra thick washer and Nylock nut. Repeat for the remaining riser mounts. Hardware Kit C Figure 16 Figure 17 Figure 17 may show more or fewer riser mounts...
-
Page 9: Step 3 Assemble Drag Hoses (1) To 360 Y-Drop
INSTRUCTIONS 360 Y-DROP ROGATOR INSTALL SHIELDS AND RISER HOSES Figure 19 Step 1 Install shield (1) onto riser tube (2). Figure 20 Step 2 Install base unit (1) onto riser tube (2). Figure 21 Step 3 Assemble drag hoses (1) to 360 Y-DROP Figure 19 base and secure with hose clamps (2). -
Page 10: Installation Complete
Repeat Steps 1-11 for the remaining 360 Y-DROP Shields. Figure 25 INSTALLATION COMPLETE. 360YIELDCENTER.COM All other trademarks are the property of 360 Yield Center, its affiliates and/or its licensors. ©2016 360 Yield Center. All rights reserved.