Dhcp - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
7. Click Save.
• Allow Guest To Access My Local Network
local network and manage it.
• Guest Network Isolation
• Enable Guest Network Bandwidth Control
Bandwidth Control rules will take effect.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control > Control Settings
4. 6.

DHCP

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
- If enabled, guests can access the
- If enabled, guests are isolated from each other.
page.
- If enabled, the Guest Network
32