Wireless Statistics; Guest Network - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
• Enable Client Isolation
that wireless stations cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.
• Enable WMM - WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
4. 4. 6.

Wireless Statistics

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Statistics
client device connected to the router.
• MAC Address - The MAC address of the connected wireless client.
• Current Status - The running status of the connected wireless client.
• Received Packets - Packets received by the wireless client.
• Sent Packets - Packets sent by the wireless client.
• SSID - SSID that the station associates with.
4. 5.

Guest Network

Guest Network allows you to provide Wi-Fi access for guests without disclosing your
host network. When you have guests in your house, apartment, or workplace, you can
create a guest network for them. In addition, you can customize guest network settings
to ensure network security and privacy.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Guest Network.
3. Enable the Guset Network
4. Create a network name for your guest network.
5. Select the Security
6. Select Schedule
guest network.
- This function isolates all connected wireless stations so
to check the data packets sent and received by each
function.
type and create the
from the Access Time
Password of the guest network.
drop-down list and customize it for the
31