Wireless Advanced - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
How
can I do
that?
Done!
4. 4. 5.

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Wireless >
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click Add New and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Advanced.
Wireless MAC Filtering.
as the filtering rule.
in the Status drop-down list.
29