Ip&Mac Binding - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
• Description - This is the information about the rules such as address range.
• Egress Bandwidth
WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Status - This field displays the status of the rule.
• Modify - Click Modify/Delete
¾ To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information as the figure shown below.
3. Click Save.
4. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
- This field displays the max and min upload bandwidth through the
- This field displays the max and min download bandwidth through
to edit/delete the rule.
50