TP-Link Archer C50(EU)3.0 User Manual page 24

Chapter 4
BigPond Cable
If your ISP provides BigPond cable connection, please select
• User Name/Password
These fields are case-sensitive.
• Auth Server - Enter the authenticating server IP address or host name.
• Auth Domain - Type in the domain suffix server name based on your location.
• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
• Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
• Connection Mode
• Always On - In this mode, the Internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
• Connect Manually
immediately. This mode also supports the
- Enter the user name and password provided by your ISP.
- IGMP (Internet Group Management Protocol) is used to manage
- In this mode, the Internet connection can be terminated
- You can click
BigPond
Connect/Disconnect
Max Idle Time
Cable.
Max Idle Time
to connect/disconnect
function as Connect
21