System Tools; Time Settings - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
• Address Autoconfiguration Type
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.
• Site Prefix Configuration Type
• Delegated
• device will delegate it to the LAN.
• Static - Configure the
• contact your ISP to get more information before you configure them.
Note:
If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to make
sure "Tunnel 6to4" works properly..
4. Click Save.

4. 16. System Tools

4. 16. 1. Time Settings

This page allows you to set the time manually or to configure automatic time
synchronization. The Router can automatically update the time from an NTP server via
the Internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to System Tools
¾ To set time manually:
1. Select your local time
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
¾ To set time automatically:
- The type of IPv6 address prefix.
- Get the IPv6 address prefix from the ISP automatically, and the
Site Prefix
> Time Settings.
zone.
- RADAD (Router Advertisement Daemon) and
and Site Prefix Length manually. Please
60