Wireless Security - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
4. 4. 3.

Wireless Security

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless
3. Configure the security settings of your wireless network and click Save.
• Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
• Authentication Type
• Encryption - Select Auto,
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
Security.
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on pre-
- Select Auto, WPA-PSK
TKIP or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
or WPA2-PSK.
27