Local Management - TP-Link Archer C50(EU)3.0 User Manual

Chapter 4
• Enable UDP-FLOOD Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
• TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
• Ignore Ping Packet From WAN Port
ping packet from the Internet cannot access the router.
• Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click Blocked DoS Host List
4. 8. 3.

Local Management

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Security > Local
the router.
For example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select Only the PCs listed can browse the built-in web pages to perform
Administrator
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
- Check the box to enable or disable this function.
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
Management, and you can block computers in LAN from accessing
tasks.
- The default value is 500. Enter a value
-Check the box to enable or disable this
- The default value is 50. Enter a value
42