Specify Dhcp Server Settings - TP-Link Archer C1200 User Manual

Chapter 14

14. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary, and you can reserve LAN IP addresses for specified client devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
¾ To specify the IP address that the router assigns:
1. Tick the Enable DHCP Server
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click Save.
¾ To reserve an IP address for a specified client device:
1. Click Add in the Address Reservation
Network > DHCP Server.
checkbox.
section.
Customize Your Network Settings
IP Address Pool.
Default Gateway is automatically filled in
73