Lan; Configuration - Teltonika RUT240 User Manual

7.3 LAN

This page is used to configure the LAN network, where all your devices and computers that you connect to the
router will reside.

7.3.1 Configuration

7.3.1.1 General Setup
Field name
1. IP address
2 IP netmask
3. IP broadcast
7.3.1.2 Advanced settings
Field name
1. Accept router
advertisements
2. Override MTU
3. Use gateway metric
4. Use WAN port as LAN
Sample value Explanation
192.168.1.1 Address that the router uses on the LAN network
255.255.255.0 A mask used to define how "large" the LAN network is
IP broadcasts are used by BOOTP and DHCP clients to find and
send requests to their respective servers
Sample value Explanation
Enable/Disable If enabled allows accepting router advertisements (Disabled by
default).
1500 MTU (Maximum Transmission Unit) specifies the largest
possible size of a data packet.
0 The LAN configuration by default generates a routing table
entry. With this field you can alter the metric of that entry.
Enable/Disable When enabled it allows you to use the WAN port as a LAN port.
53