Mobile Data Limit - Teltonika RUT240 User Manual

DHCP mode: Dynamic
When using Dynamic mode, the device will get an IP from the GSM operator, which connects to the router first.
When using Passthrough in dynamic mode, the DHCP in LAN configuration will be disabled.
DHCP mode: No DHCP
Using no DHCP mode, the IP (also subnet, gateway and DNS) should be entered manually on your device which
you are trying to connect to the router's LAN. When using Passthrough in no DHCP mode, the DHCP in LAN
configuration will be disabled.
7.1.1.2 Mobile Data On Demand
Field name
1. Enable
2. No data
timeout(sec)

7.1.2 Mobile Data Limit

This function lets you limit maximum amount of data transferred on WAN interface in order to minimize
unwanted traffic costs.
7.1.2.1 Data Connection Limit Configuration
Field Name
1. Enable data
connection limit
2. Data limit* (MB)
3. Period
4. Start day/ Start hour
* Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.
Possible values Explanation
Enable/Disable Mobile Data On Demand function enables you to keep mobile data
connection on only when it's in use.
10-99999999 The time it takes for mobile data connection to be terminated if there
is no network activity.
Sample value
Enable/Disable
-
Month/Week/Day
1
Explanation
Disables mobile data when a limit for the current period is
reached
Disable mobile data after limit value in MB is reached
Period for which mobile data limiting should apply
A starting time for mobile data limiting period
44