Remote Configuration - Teltonika RUT240 User Manual

8.6.5 Remote Configuration

RUT240 can be configured via SMS from another RUT240. You only have to select which configuration details to
send, generate the SMS Text, type in the phone number and Serial number of the router that you wish to configure and
Send the SMS.
Total count of SMS is managed automatically. You should be aware of possible number of SMS and use this
feature at your own responsibility. It should not, generally, be used if you have high cost per SMS. This is especially
relevant if you will try to send whole OpenVPN configuration, which might accumulate ~40 SMS.
8.6.5.1 Receive configuration
This section controls how configuration initiation party should identify itself. In this scenario RUT240 itself is being
configured.
Field name
1.
Enable
1.
Authorization method
2. Allowed users
Note, that for safety reasons Authorization method should be configured before deployment of the router.
8.6.5.2 Send configuration
This section lets you configure remote RUT240 devices. The authorization settings must confirm to those that are
set on the receiving party.
Values
Enabled / Disabled
No authorization /
By serial
By administration password
From all numbers
From group
From single number
Notes
Enables router to receive configuration
Describes what kind of authorization to use for SMS
management. Method at Receiving and Sending ends
must match
Gives greater control and security measures
107