Operation Modes; Powering Options; Powering The Device From Higher Voltage - Teltonika RUT240 User Manual

4 Operation Modes

The RUT2xx series router supports various operation modes. It can be connected to the internet (WAN) via
mobile, standard Ethernet cable or via a wireless network. When connecting to the internet, you may also backup your
main WAN connection with one or two backup connections. Any interface can act like backup if configured so. At first
router uses its main WAN connection, if it is lost then router tries to connect via backup with higher priority and if that
fails too, router tries the second backup option.
WAN
Mobile
Ethernet
Wi-Fi
In later sections it will be explained, in detail, how to configure your router to work in a desired mode.

5 Powering Options

The RUT2xx router can be powered from power socket

5.1 Powering the device from higher voltage

If you decide not to use our standard 9 VDC wall adapters and want to power the device from higher voltage (15 –
30 VDC), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage
peaks significantly higher than the declared output voltage, especially during connection.
While the device is designed to accept input voltage of up to 30 VDC, peaks from high voltage power supplies can
harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety
equipment to suppress voltage peaks from the power supply.
Main WAN
√
√
√
16
Backup WAN
√
√
√
LAN
x
√
√