Teltonika RUT240 User Manual page 64

Field Name
1. Name
2. Protocol
3. External Port
4. Internal IP address
5. Internal port
When you click edit you can fine tune a rule to near perfection, if you should desire that.
Field Name
1. Name
2. Protocol
3. Source zone
4. Source MAC
address
5. Source IP address
7. Source port
8. External IP address
Sample value
Enable_SSH_WAN_PASSTHROUGH Name of the rule. Used purely to make it easier to
TCP/UDP/TCP+UDP/Other
1-65535
IP address of a computer on your
LAN
1-65535
Sample value
ENABLE_SSH_WAN_PASSTHROUGH Name of the rule. Used purely to make it easier to
TCP/UDP/TCP+
UDP/ICMP/Custom
LAN/VPN/WAN
any
any
any
any
Explanation
manage rules.
The type of protocol of the incoming packet.
The traffic will be forwarded from this port of the
WAN network.
The IP address of the internal machine that hosts a
service that we want to access from the outside.
The rule will redirect the traffic to that port of the
internal machine.
Explanation
manage rules.
You may specify multiple by selecting (custom) and
then entering protocols separated by space
Match incoming traffic from this zone only
Match incoming traffic from these MACs only
Match incoming traffic from this IP or range only
Match incoming traffic originating from the given
source port or port range on the client host only
Match incoming traffic directed at the given IP
64