Pelican WF6 Owner's Manual page 18

Pelican WF6/WF10 Iron/Manganese Filter and Salt Free Softener
3. Install the fitting onto the inlet and outlet sides of the Bypass Valve. Follow the diagram supplied
with the fitting.
4. Connect the incoming water supply from the outlet of the Whole House Iron & Manganese
Tank to the inlet side of the Pelican Whole House Water Filter.
5. Connect the outgoing water supply to the outlet side of the Bypass Valve.
CAUTION:
Avoid high flow rates such as bathtub, utility sinks, hose bibs, multi-headed showers, body sprayers, or
anything that is considered high flow for the first 72 hours to avoid flow restrictions caused by carbon
blockage of the top basket inside the carbon tank.
Carbon dust may be released into the water lines of the house/building during the first few days of water
use after carbon tank installation. The carbon dust is harmless, but may give the water a gray
appearance that should diminish within a week or 10 days depending on water use.
© 2019 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Rev T
Page 18
www.pelicanwater.com
(877) 842-1635