Summary of Contents for Pelican Hot Water Post-Filter System
Page 1
Owner’s Manual 10-micron Hot Water Post-Filter System...
Page 2
Pelican Water Technologies shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
-Rev B 10-micron Hot Water Post-Filter System Page 4 Product Operation and Specifications Specification Description 10-micron Hot Water Post-Filter System Rated Service Flow 15 gpm Minimum Working Pressure 30 psi Maximum Working Pressure 125 psi Maximum Vacuum Operating Temperatures 40 - 160º F...
-Rev B 10-micron Hot Water Post-Filter System Page 5 Complete Parts List Note: Pelican supplies the parts below to accommodate a variety of water supply lines. Table 1: Parts List Part Description Qty. Part Description Qty. Filter Wrench 10-micron Hot Water...
-Rev B 10-micron Hot Water Post-Filter System Page 7 Assembly Housing 10 Micron Cover Filter 10 Micron Filter Housing Stand Pipe Figure 2 1. Unscrew the cover from the Filter Housing. 2. Place the 10-micron filter onto the Stand Pipe in the Filter Housing.
-Rev B 10-micron Hot Water Post-Filter System Page 8 Installation Shut-off Mounting Valve Bracket from Tankless Top View Water Heater Figure 3 1. Shut off the main water supply. 2. Attach the Mounting Bracket to the wall using the supplied Phillips Head Screws.
Pipe Figure 4 1. Turn off the water supply to the 10-micron Hot Water Post-Filter System. 2. Run the faucet (hot water) connected to the system to relieve the pressure. 3. Unscrew the Filter Housing clockwise using the supplied Filter Wrench.
Page 10
-Rev B 10-micron Hot Water Post-Filter System Page 10 5. Remove the O-Ring and wipe the groove and O-Ring clean. Lubricate the O-Ring with a coating of clean silicone grease. Replace O-Ring and press the O-Ring down into the groove with two fingers.
Pelican's liability hereunder shall not exceed the cost of the product. Under no circumstances will Pelican be liable for any incidental or consequential damages or for any other loss, damage or expense of any kind, including loss of use, arising in connection with the installation or use or inability to use the Covered Items or any water treatment system the Covered Items are incorporated into.
Page 12
Page 12 Manufacturer’s Performance Guarantee The Pelican PC600 Premium Whole House Water Filter is guaranteed to perform for 600,000 gallons or (5) years whichever comes first. The Pelican PC1000 Premium Whole House Water Filter is guaranteed to perform for 1,000,000 gallons or (5) years whichever comes first. The authorized dealers shall be responsible for the repair or replacement of defective media only, labor to replace the media is the responsibility of the purchaser.
-Rev B 10-micron Hot Water Post-Filter System Page 13 Warranty Registration Form Send in this Warranty Registration Form to validate your warranty or visit www.PelicanWaterTechnologies.com to complete warranty registration form. Pelican Warranty Registration Form Date Item(s) were Received: Order ID#:...
Need help?
Do you have a question about the Hot Water Post-Filter System and is the answer not in the manual?
Questions and answers