dji INSPIRE 2 User Manual
Focus handwheelremote controller stand
Hide thumbs
Also See for INSPIRE 2:
- User manual ,
- Quick start manual (99 pages) ,
- Operating procedures manual (22 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for dji INSPIRE 2
Summary of Contents for dji INSPIRE 2
- Page 1 INSPIRE 2 DJI Focus Handwheel- Remote Controller Stand User Guide V1.0 2017.01...
- Page 2 Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI.
- Page 3 1. Remove the screws and the securing pad on the remote controller as shown below. 2. Align the holes on the securing pad of the DJI Focus Handwheel-Remote Controller stand with the holes on the remote controller. Insert the original screws and tighten to secure the securing pad.
- Page 4 Remove the screws on the top of the securing spanner to adjust its position if the securing spanner is hard to tighten, insert screws and tighten after adjustment. Put the screws in the correct places during installation and removal. Specifications Weight: 143.56 g © 2017 DJI All Rights Reserved.
- Page 5 DJI Support http://www.dji.com/support If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. Printed in China. INSPIRE is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.
Need help?
Do you have a question about the INSPIRE 2 and is the answer not in the manual?
Questions and answers