Communication Options Menu - Omega i Series User Manual

ENTER COMMUNICATION OPTION MENU:
Press a
Press d
Press a
Press d
COMMUNICATION PARAMETERS SUBMENU:
Allows the user to adjust Serial Communications Settings of the instrument.
When connecting an instrument to a computer or other device, the
Communications Parameters must match. Generally the default settings
(as shown in Section 5) should be utilized.
Press d
BAUD SUBMENU:
Press d
Press b
Press d
PARITY SUBMENU:
Press d
Press b
Press d
DATA BIT SUBMENU:
Press d
Press b
Press d
1) Press a , if necessary, until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press a , if necessary, until Display advances to COMM

Communication Options Menu.

4) Display advances to C.PAR Communication Parameters
Submenu.
If Communication Option is not installed, the display shows
NONE and skips to the Color Display Menu.
5) Display advances to BAUD Baud Submenu.
6) Display flashes previous selection for BAUD value.
7) Scroll through the available selections: 300_ , 600_ , 1200 ,
2400 , 4800 , 9600 , 19.2K .
8) Display shows STRD stored message momentarily and then
advances to PRTY only, if it was changed, otherwise press a to
advance to PRTY Parity Submenu.
9) Display flashes previous selection for "Parity".
10) Scroll through the available selections: NO, ODD, EVEN.
11) Display shows STRD stored message momentarily and then
advances to DATA only, if it was changed, otherwise press a to
advance to DATA Data Bit Submenu.
12) Display flashes previous selection for "Data Bit".
13) Scroll through the available selections: 7-BIT, 8-BIT.
14) Display shows STRD stored message and then advances to
STOP only, if it was changed, otherwise press a to advance to
STOP Stop Bit Submenu.
47