Customizing The Wash Cycle, Favorite Cycle - Fisher & Paykel WA37T26GW2 Installation Instructions And User Manual

Wash Cycles and Options
Customizing the Wash Cycles
You can program your Ecosmart™ to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the Regular cycle to cold wash or set Heavy Duty to
include a soak.
To Customize a Cycle
Press the Power Button.
1
Press selected wash cycle button. Hold down for
2
4 seconds. You will hear two quick beeps and
the wash cycle light will flash.
Select your wash options, (eg cold wash, soak).
3
Press the wash cycle button again to store your
4
customized cycle.
When you are customizing a wash cycle, you can
shorten or lengthen the agitation time.
To shorten the agitation time, press ADVANCE to
reduce the number of green lights.
To increase the agitation time keep pressing ADVANCE
until all the green lights are on. (On Heavy Duty you
can only decrease the wash time)
Note:
Unlike the Favorite cycle you cannot customize a wash cycle to start at the rinse or spin stage.
Favorite Cycle
Favorite cycle lets you design your own wash cycle. Favorite can be any wash cycle with any of
its wash options, and it can start from any point in the cycle.
To Set Your Favorite Cycle
Press the POWER Button.
1
Press the FAVORITE cycle button. Hold down for 4 seconds
2
until you hear two quick beeps and the Favorite light flashes.
Select your favorite cycle (eg Regular or Delicate).
3
Select the wash options (eg soak, time saver). Use Advance if
4
you want part of a cycle (eg spin only).
Press FAVORITE again to store your favorite cycle.
5
Note:
Your Ecosmart™ will remember your favorite cycle, or any other cycle that has been customized,
even when unplugged from the wall. It is not possible to program a delayed start into the
Favorite cycle.
22