Fisher & Paykel WA3927G2 Manual

Caring For Your Washer

When You Have Finished Using Your

Washer

• Turn off the faucets to prevent the chance of flooding

should a hose burst.

• Turn off the power at the wall.

If you always wash with cold water, we recommend that a

WARM or HOT wash be used at regular intervals, eg every

5th wash should be at least a warm one.

Ensure the power is turned off at the wall before cleaning your washer

• Clean the surfaces of your washer with a soft damp cloth only and wipe dry. Do not use scouring or spray

cleaners as they can damage the paint, plastic and panel surfaces.

• Clean the fabric softener dispenser after each cycle using warm soapy water.

https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G2/User_Guide_WA3927G2/16_Caring_For...

Updated: Tue, 11 Apr 2023 18:44:07 GMT

Table of Contents

Do you have a question about the WA3927G2 and is the answer not in the manual?

Page 1 • Clean the surfaces of your washer with a soft damp cloth only and wipe dry. Do not use scouring or spray cleaners as they can damage the paint, plastic and panel surfaces. • Clean the fabric softener dispenser after each cycle using warm soapy water. https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G2/User_Guide_WA3927G2/16_Caring_For… Updated: Tue, 11 Apr 2023 18:44:07 GMT Powered by...
Page 2 • Separate the cup from the dispenser body by pushing downwards on the base of the cup. Fig.39 Push cup through dispenser with thumb to remove https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G2/User_Guide_WA3927G2/16_Caring_For… Updated: Tue, 11 Apr 2023 18:44:07 GMT Powered by...
Page 3 Your washer has a self-cleaning lint system. The machine automatically separates the lint from the wash water, traps the lint between the inner basket and outer tub and flushes it out at the end of the wash. https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G2/User_Guide_WA3927G2/16_Caring_For… Updated: Tue, 11 Apr 2023 18:44:07 GMT...