Q4X Stainless Steel Analog Laser Sensor
1.3 Features
1
Figure 1. Sensor Features
1.3.1 Display and Indicators
The display is a 4-digit, 7-segment LED. The main screen is the Run Mode screen, which shows the current distance to the target in
millimeters.
Figure 2. Display in Run Mode
Output Indicator
•
On—Displayed distance is within the taught analog
output window
•
Off—Displayed distance is outside of the taught analog
output window
Active TEACH Indicators (2PT and 1PT)
•
2-PT on—Two-point TEACH mode selected (default)
•
1-PT on—One-point TEACH mode selected
1.3.2 Buttons
Use the sensor buttons (SELECT)(TEACH), (+)(DISP), and (-)(MODE) to program the sensor.
4
2
1. Output Indicator (Amber)
2. Display
3
3. Buttons
1. Stability Indicator (STB = Green)
2. Active TEACH Indicators
3. Display Value Indicator (MM = Amber)
www.bannerengineering.com - Tel: 763.544.3164
•
2-PT = Two-Point TEACH (Amber)
•
1-PT = One-Point TEACH (Amber)
Stability Indicator (STB)
•
On—Stable signal within the specified sensing range
•
Flashing—Marginal signal, the target is outside of the
limits of the specified sensing range, or a multiple peak
condition exists
•
Off—No target detected within the specified sensing
range
Display Value Indicator (MM)
•
On—Display shows the distance in millimeters (default)
•
Off—Display shows the analog output value