Features And Indicators; Display; Buttons - Banner L-GAGE LTF Instruction Manual

®
L-GAGE LTF Time of Flight Laser Distance Sensor

1.2.1 Features and Indicators

Analog Output
LED Indicator
Power
LED Indicator
Discrete Output
LED Indicator
Up and Down

Buttons

Enter Button
Escape Button
Figure 1. Features

1.2.2 Display

Figure 2. Display shown in Run Mode
1.2.3 Buttons
Use the sensor buttons Down, Up, Enter, and Escape to program the sensor and to access sensor information.
Down and Up Buttons
Press Down and Up to:
• Access the Quick Menu from Run mode
• Navigate the menu systems
• Change programming settings
• Change individual digit values in distance based settings
When navigating the menu systems, the menu items loop.
Enter Button
Press Enter to:
• Access the Sensor Menu from Run mode
• Access the submenus
• Move right one digit in distance based settings
• Save changes
In the Sensor Menu, a check mark
accesses a submenu.
Press Enter to save changes. New values flash rapidly and the sensor returns to the parent menu.
4
Three LED indicators provide ongoing indication of the
sensing status.
Analog Output LED Indicator
Solid Amber = Displayed distance is within the taught
Display
analog output window
Off = Displayed distance is outside the taught analog
output window
Power LED Indicator
Solid Green = Normal operation, power On and laser On
Flashing Green (1 Hz) = Power On and laser Off (laser
enable mode)
Discrete Output LED Indicator
Solid Amber = Discrete Output is On
Off = Discrete Output is Off
The display is a 2-line, 8-character LCD. The main screen is
the Run mode screen, which shows the real-time distance
measurement and the analog output measurement.
in the lower right corner of the display indicates that pressing Enter
www.bannerengineering.com - Tel: +1.763.544.3164