Charging In The Smartclean System; Using The Appliance - Philips 9000 Series User Manual

Charging in the SmartClean system

3
1
2

Using the appliance

(S9732/33, S9731/33, S9552/26, S9551/26,
S9186/26, S9185/26 only)
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press the top cap to be able to place the shaver
in the holder ('click').
4 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
5 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
Note: The battery symbol starts to flash to indicate
that the appliance is charging. When the battery is
fully charged, the battery symbol lights up
continuously.
Note: This appliance can only be used without
cord.
44
English