Charging With The Supply Unit; Charging In The Smartclean System (Specific Types Only) - Philips 9000 Series Manual

16
English

Charging with the supply unit

2
1
Charging in the SmartClean system (specific types
only)
indicated by the battery charge percentage shown
on the display.
When you connect the shaver to the wall socket,
you hear a sound.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
When you connect the shaver to the wall
socket, you hear a sound.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press to open the SmartClean system cap, to be
able to place the shaver in the holder ('click').