Charging With The Supply Unit; Charging In The Smartclean System (Specific Types Only) - Philips S8950 Manual

12
English
Charging

Charging with the supply unit

1
2
Charging in the SmartClean system (specific types
only)
replacement reminder, the shaver resets
automatically after 9 shaves.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the appliance while it is
charging.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press the top cap to be able to place the shaver
in the holder ('click').