For Electric Models Only - Fisher & Paykel SmartLoad DE62T27GW1 Installation Instructions And User Manual

Power Supply Cord Requirements for U.S.A

for Electric Models Only

Only a UL listed power-supply cord kit a suitable length for
the installation and rated 120/240 V min, 30 A and marked
with use for clothes dryers shall be used.
This shall have ring terminals to connect to the dryer.
The UL-rated strain relief included with it shall be suitable for
a 1 1/8" (28.5mm) hole.
If your outlet looks like this Choose this power supply cord
3 wire
4 wire
Connecting by Direct Wire
Power supply cable must match power supply (4-wire or 3-wire) and be:
Flexible armoured or non-metallic sheathed copper cable (with ground wire). All current-carrying
wires must be insulated.
10 gauge AWG solid copper wire (do not use aluminium wire).
Suitable length for the installation.
A UL approved strain relief must be used.
Grounding for a Direct Wired Appliance
This appliance must be connected to a grounded metal permanent wiring system, or an
equipment grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal on the appliance.
24