Privacy Shield (Optional) - VeriFone VX 520 3G Installation Manual

T S
ERMINAL ETUP

Privacy Shield (Optional)

WARNING
Privacy Shield
(Optional)
NOTE
28
VX 520 3G I
NSTALLATION
3
Rotate the power plug counter-clockwise and flush against the side panel to
lock the plug in place.
4
Route the cable in the direction of the arrow above the power port and sling
the cable over the underside of the thermal paper container.
5
Close the terminal rear cover.
6
Plug the AC power cord into a wall outlet or powered surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
When the terminal has power, the terminal lights are activated.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
VeriFone copyright screen.
The privacy shield protects the customers' PIN entry from being seen by the
cashier or other customers.
Merchants who install the terminal without the privacy shield must ensure the
cardholder's privacy when entering his PIN by positioning the terminal away from
open view.
G
UIDE
appears on screen after the initial
DOWNLOAD NEEDED