Steering Cable - Starboard Side Routed Cable - Mercury 300 XS OptiMax Manual

2. Thread the lifting eye into the flywheel hub for a minimum of five turns.
3. Connect a hoist to the lifting eye.
4. Lift the outboard and place it on the boat transom.
Lifting Eye
Steering Cable ‑ Starboard Side Routed Cable
1. Lubricate the O‑ring seal and the entire cable end.
Tube Ref
No.
95
eng
OUTBOARD INSTALLATION
a
2756
95
Description
2-4-C with PTFE
28495
Threads into the flywheel to remove the
powerhead assembly from the driveshaft
housing, or to lift entire engine for
removal/installation.
Where Used
O-ring seal and entire cable end
107
a - Lifting eye
91‑90455‑‑1
3724
Part No.
92-802859A 1