Using The Needle Threader - JUKI HZL-60 series Instruction Manual

Using the needle
threader
Raise the needle to its
highest position and lower
the presser foot.
Attention:
Turn power switch to the off
position ("O").
Lower the needle threader lever
slowly and draw the thread
through the thread guide as
illustrated and then to the right.
The needle threader
automatically turns to the
threading position and the hook
pin passes through the needle
eye.
Take the thread in front of the
needle.
Hold the thread loosely and
release the lever slowly. The
hook will turn and pass the
thread through the needle eye
forming a loop.
Pull the thread through the
needle eye.
17