Adjusting Presser Foot Pressure - JUKI HZL-60 series Instruction Manual

Adjusting presser foot
pressure
Standard presser foot pressure
set at "2".
The presser foot pressure of
the machine has been pre-set
and no need for change unless
sewing particular type of fabric
(light-or-heavy weight).
If you do need to adjust the
presser foot pressure, turn the
presser adjusting screw by
ones finger.
For sewing very thin fabric,
loosen the pressure by turning
the screw counterclockwise to
move the screw upward and
the pressure decreased. If kept
turning the screw, it could be
take out. By that time, just turn
the screw clockwise, it could be
locked back and readjust the
pressure.
For heavy fabric, tighten the
pressure by turning the screw
clockwise to move the screw
downward and the pressure
increased. Once screw could
not be moved any further, it has
been reached the bottom,
please do not turn any more.
19