Inserting A Side Zipper - JUKI HZL-60 series Instruction Manual

5mm
Reverse
stitches
Basting
stitching
Reverse
side
2cm

Inserting a side zipper

- Place the right sides of the
- Fold back to the left seam
- Attach the zipper foot. Attach
- Stitch the left side of zipper
- Turn the fabric right side out,
- Stop about 5cm (2 inches)
44
fabric together. Sew a bottom
seam 2cm from the right edge
to the zipper bottom stop
position. Sew a few stitches in
reverse to lock. Increase the
stitch length to maximum, set
the tension below 2, and
baste the remaining length of
the fabric.
allowance.
Turn under the right seam
allowance to form 3mm (1/8
inch) fold.
the right side of the presser
foot pin to the holder when
sewing the left side of the
zipper. Attach the left side of
the presser foot pin to the
presser foot holder when
sewing the right side of the
zipper.
from bottom to top.
stitch across the lower end
and right side of zipper.
from the top of zipper.
Remove the basting and open
the zipper. Stitch the
remainder of the seam.