Connecting To The Network Through Lan Interface; Connecting An Ipod - Pioneer Elite SC-99 Operating Instructions Manual

03

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
NETWORK HDMI OUT
to LAN port
NAS
Computer
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! When connecting to the network via wireless LAN, or when using the Bluetooth feature, use with the wireless
antenna upright.
! The range limit of the wireless antenna is indicated in the following diagram. Applying unneccessary force may
result in damage.
Wireless antenna
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
NETWORK
Internet
Modem
LAN
Router
3 2 1 WAN
LAN cable (sold separately)
to LAN port
Setting network connection on page 53

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
iPod iPhone AUTO/ALC/
DIRECT CONTROL DIRECT
5V 1 A
Tip
! An iPod/iPhone can be connected to the receiver. For details on supported models and versions of the respec-
tive products, see Playing an iPod on
%
Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone terminal on the front panel of this receiver.
! For the cable connection, also refer to the operating instructions for your iPod.
! When connecting an iPhone to this unit, keep the iPhone at least 20 cm (0.66 ft) away from this unit. If the
iPhone is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this
device.
.
! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit's power is turned on.)
! For instructions on playing the iPod, see
47
Connecting your equipment
iPod/iPhone
STATUS BAND TUNER EDIT
HDMI 5 INPUT
USB cable included with the iPod
page 65 .
Playing an iPod on page 65 .